Mechanical Set Production Packer // Size 4 1/2"-7 5/8" Material as per Customer Requirement Pressure up to 10000 psi Temperature up to 350 DEG F Grade V3 - V6 (Validation) Q1 /Q2 (Quality)

Mech Pac I: Mechanical set production packer is a high performance full bore single string retrievable packer.

Mechanical set production packer is a type of retrievable packer in which tubing can be loaded in tension, compression or in neutral conditions and provides full opening I.D for stimulation and thru-tubing perforating.

Staged loading of upper sleeves make it ease of release.

Mech Pac II: This packer is a retrievable set-down packer that features a large bypass area.

The bypass area is controlled by a face-seal type bypass valve which is actuated by a 30” inch stroke mandrel.

The packer is available in a single-grip version for use as a conventional long-stroke production packer and in a double-grip version (with hold-down buttons) for combination production and well stimulation operations.

The double-grip packer are used where pressure differential from below the packer is anticipated, features an integral hydraulic hold-down buttons that is located below the bypass valve.

The double-grip packer also incorporates a unique built-in “differential lock” that utilizes a balance sleeve actuated by pressure from below the packer.

This pressure creates an additional downward force which, combined with set-down weight helps to maintain the force necessary to keep the bypass valve closed.

Mech Pac III: It is a general purpose packer for production, injection, zone isolation or remedial operations.

It holds pressure from above or below while allowing the tubing to be placed in tension, compression or in a neutral condition.

This is a full-bore double-grip retrievable packer with an integral un-loader. Opposed non-transferring dovetail slips prevent movement of the packer in either direction due to pressure differentials, while allowing landing of the tubing in tension, compression or neutral.

The lock segments serve as a releasable lock ring to maintain pack-off once the packer is set and locks the un-loader in the closed position until the tool is released. The split lock and control segments allow the tool to be set and released with right-hand rotation.

The retrievable lok-set packers are compression set retrievable packers.

Mech Pac IV: This is a mechanical set double grip retrievable production packer for medium to high pressure applications.

The packer allows unrestricted flow and passage of full gauge wire line tools and accessories with an unrestricted I.D, making it ideal for zone isolation injection and production applications.

It can be set with production tubing in tension, compression or neutral maximizing effectiveness in shallow wells or fiberglass tubing operation.

The packer's mechanical lock-set action closes an internal bypass and allows application of pressure above or below the packer.

The packer is released by a ¼ right-hand turn at the tool, followed by straight pickup of the production tubing. Optional emergency release feature is also available on request.

Mech Pac V: Packer is a full opening, hook wall packer used for testing, treating, and squeeze cemneting operations.

The full opening design of the packer mandrel bore allows large volume of fluid to pumpthrough the tool. Tubing type guns and other wireline tools can be run through the packer.

It can be set and relocated as many times as necessary with the simple tubning maniplation.

Bi-directional carburized slips provide greater holding capacity and improved wear resistance in high strength casing pressure through the tuning activates the slips in hydraulichold down mechanism an optional integral circulating valve locks into open or close position during squeeze or treating operations and opens easily to allow circulation above the packer.

Mech Pac VI Compression set: Mechanical retrievable casing packer is a compact, economical set down packer that can be used by itself for production applications or with a companion unloader and hold down.

It can be used for well stimulation, testing and other pressuring operations and then left in the well as a production packer.

Low cost due to its short and compact design it is economical to buy an maintain the packer. Compression set packer is constructed with minimum number of parts thus it is easy to redress.

The dependable rocker type slips and synthetic rubber packing elements are the same type used on other highly successful baker equipmentthe simple and reliable J to J mechanism makes its setting and unsetting very easy.

Mech Pac VI Tension Set: Tension set mechanical packer provides a compact, economical retrievable packer for use where a set down type packer is impratical because of pressure requirements.

Primirily used in water flood applications, this packer can also be used for production and/or treating operations. Short and compact design: increase the efficiency of handling, shipping, and storing.

Rocker type slip design: eliminates the need for extra drag blocks. slip tie links and guide grooves, thus making possible not only shorter packers but ones permanent free from stuck or crocked slips.